Can You Use J-B Weld On Golf Clubs?

“Can you use J-B Weld on golf clubs?” This question is seen countless times on golf forums across the internet. Players everywhere are curious to learn how best to care for their expensive equipment. 

On this page, we’ll be diving into the J-B question. We’ll explore what the product is, why people want to use it, and whether J-B Weld is good for golf clubs. 

What is J-B Weld? 

The J-B Weld brand has been producing epoxies and other strong adhesives for generations. If you need something to stick firmly to something else, the company’s line of products might just be for you.

Question is, why do people want to use it on their clubs? 

J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz.

Why People Want to Use it on Golf Clubs  

J-B “Kwikweld” and the company’s original product, “J-B Cold Weld,” are popular among golfers around the world. They use the strong epoxy when regripping their clubs. The soft outer layers on a club’s handle can become loose over time. 

To return their equipment to its former glory, players can remove the old grip and replace it. Some people think that J-B Weld is the perfect option, but are they right?

In A Nutshell – Can You Use J-B Weld on Golf Clubs? 

In short, yes – but this doesn’t necessarily mean it’s the best way to go. The main advantage of this kind of epoxy is that it produces a super firm bond. Once you’ve adhered your new grip to the shaft of your clubs, chances are it’s going to stay put for a very long time.

As it happens, this is actually part of the problem with using this kind of product when regripping. Read on to learn more. 

Problems With Using J-B Weld On Golf Clubs 

So, we’ve established that it’s absolutely possible to regrip your clubs using J-B Weld so why might this be a bad idea?

You Don’t Have Tons of Time 

Regripping a golf club is hardly rocket science, but it can be a fiddly task if you’ve never done it before. Gently sliding your new grip onto the shaft takes a little patience and plenty of accuracy. 

Products like J-B Weld dry remarkably quickly. In the right context, this is considered a huge bonus. When regripping golf clubs, however, it can actually be a bit of a problem. 

With such a short window of opportunity before your epoxy sets, you can easily install a wonky grip if you’re not careful. If you’re confident in what you’re doing, you may be alright. Otherwise, it’s best to use a purpose-designed epoxy like this one. 

The Bond is Crazy Strong 

Repairing part of your boat? Joining wood together? J-B Weld products can be fantastic. For a golf club, though, this crazy strong bond might not be ideal. If you ever decide you want to regrip your club again further down the line, removing your old one is a bit more of a hassle.

How to Remove A Grip Adhered With J-B Weld 

Fortunately, it’s possible to get rid of that old grip even if you used J-B Weld the first time around. The process is just a little longer than you may be used to. You’ll need a heat gun and a golf club shaft extractor.

To remove your old grip, follow these basic steps: 

  1. Turn on your heat gun and heat up your golf club’s handle 
  2. After a few minutes, the epoxy should have loosened its grip on your club’s shaft 
  3. Use your shaft extractor to carefully remove your old grip

Keep in mind that you’ll also need a vice to use your extractor properly. Before adding your new grip, be sure to also remove the old tape underneath and apply some fresh tape. 

Click here to learn more about golf club regripping.

What Can You Use Instead of J-B Weld? 

There are tons of purpose-designed epoxies on the market that are all built to be perfect for golf clubs. Double-check the metal used to make your shaft and buy an epoxy that works well with it. 

In general, this kind of product works great.

Is J-B Weld Safe for Golf Clubs? Final Thoughts 

We hope this page has helped to clear up any confusion. While it’s absolutely possible to use J-B Weld on golf clubs – and indeed many people online report success with this method – the drying time and bond strength aren’t the most appropriate option out there.

If in doubt, rely on adhesives that have been specifically designed for your type of club. 

Latest posts by Barry (see all)